FPV airplane stabilizer control AFFS autopilot system

Auto stabilizing. Return to Home function. FPV airplane stabilizer control AFFS autopilot system.

FPV airplane stabilizer control AFFS autopilot system

1. Auto stabilizing

2. Return to Home function.

3. Auto circle over given position. 4.Hold altitude RC normal flight.

Technical Target: Working voltage: 4.0~6.0 Volt Electric current: 30mA (5V) Size: 55 x 33 x 20 mm Weight( exclude electric wire): 12g Temperature range: -25 oC~ +70 oC Maximum rate of rotating: < 1200 o/s Applications as the following: normal fixed-wing plane, delta-winged plane with rudder, delta-winged plane without rudder, rudder plane without aileron, V-end plane with aileron, V-end plane without aileron. plane without aileron, V-end plane with aileron, V-end plane without aileron. The 21AP system consists of: 1. 21 AP-II 2. OSD3. DL 100A (Current Sensor) 4. GPS (10HZ GPS module) Technical target of the OSD 2.0: Working Voltage: 7.2~24 Volt. Electric Current: 0.1A (12V). Size: 47 x 30 x 12 mm. Weight(exclude electric wire): 10g. Temp Range: -25 oC~ +65oC. Current Measuring Range: 0 ~ 30A 

The interface and features of the GPS circuit board

TX0:Data transmission. Connect to the 21AP RX pin.

RX0:Data receive. Connect to 21AP TX pin.

Interface Features: TTL level

Baud rate: 38400

Data bits: 8

Stop bits: 1

Parity: None

GPS Data refresh rate: 10Hz

• 1 x 21AP Version II unit

• 6 x RC receiver connecting wire;

• 1 x GPS Receiver; 

• 1 x Current Sensor; 

• 1 x OSD circuit board;

• 2 x Velcro double sided tape

• 1 x instruction manual; 

• 1 x vibration absorbing mount;

• GPS wire with ferrite filter

• Some related wiring

FPV airplane stabilizer control AFFS autopilot system